Once a new roof installation is complete and the scaffolding has come down, most of what you can easily inspect from ground level is the eaves, since this is the lowest and most visible part of the roof. Taking a few minutes to look over this detail properly is a sensible final step before considering the job fully finished, and it does not require climbing a ladder or getting close to the roof itself.
From the ground, look along the eaves line for consistency. The first course of tiles or slates should sit level and overhang the fascia by a similar amount along the whole length of the roof, without obvious dips or high points. On a property in Kingsweston with more than one roof slope or an extension tying into an older section, check that the eaves lines match up sensibly where different roof sections meet, since this is a common area for small inconsistencies to appear if the two sections were not carefully coordinated during installation.
Next, check the fascia and guttering themselves. The fascia should be straight, free of visible gaps at joints, and properly painted or finished if it is timber. The gutter should sit tight against the fascia with brackets evenly spaced, and there should be no obvious sagging between support points. If you can see daylight between the gutter and fascia, or between fascia boards at a joint, it is worth flagging before final sign-off, since these small gaps are exactly where water can begin to cause problems over time.
It is also worth looking, where visible, for signs that ventilation and bird protection have actually been fitted at the eaves rather than simply specified on paper. A ventilated tray or eaves strip should be at least partly visible along the underside of the roof edge, and any comb filler or mesh should run continuously along the eaves without obvious gaps where birds or debris could get through.
It is also worth checking after the first heavy rain following completion. Watch how water behaves along the eaves: it should run cleanly into the gutter without dripping behind it, overshooting at any point, or pooling anywhere along the run. This kind of real-world check tells you more about whether the eaves detailing has been done properly than a dry visual inspection ever can, and it is a good idea to make a note of anything unusual so it can be raised promptly.
A reputable roofer should be happy to walk through these checks with you and address anything that does not look right as part of the completed work. Brunel Roofing Bristol carries out its own thorough checks on completion of every new roof installation in Kingsweston, and stands behind the work with a 15-year guarantee, so please get in touch if you would like a quote or have any questions about the eaves detailing on your roof.
Get a Free Quote for New Roof Installations in Kingsweston
Every roof is different — the fastest way to get an accurate answer is a quick chat with our team.