Professional EPDM Rubber Roofing in Bristol

EPDM is a popular modern flat roofing material used on extensions, garages, porches, garden rooms and other flat or low-pitched roofs.

Brunel Roofing Bristol installs EPDM rubber roofing systems throughout Bristol, providing a flexible and highly weather-resistant flat roofing solution.

Where Can EPDM Roofing Be Used?

EPDM can be suitable for:

• Garage roofs
• House extensions
• Porch roofs
• Garden rooms
• Dormer roofs
• Outbuildings
• Small commercial roofs
• Replacement flat roofs

The system can be installed as part of a new roofing project or used when an existing flat roof has reached the end of its useful life.

Benefits of EPDM Rubber Roofing

EPDM has become popular because it provides a clean, relatively simple flat roofing system with excellent resistance to normal weather conditions.

Advantages include its flexibility, low maintenance requirements and suitability for many different flat roof shapes and sizes.

Correct preparation of the roof deck, edges, outlets and junctions is essential to achieving a reliable installation.

EPDM Roof Installers Across Bristol

We install and repair EPDM rubber roofing across Bristol and surrounding locations.

Select your area below to find more information about EPDM roofing near you.

EPDM Compared With Felt and GRP: What Actually Matters

Traditional felt roofing is built up in overlapping layers with torched or bonded seams, and it's usually those seams, plus the detailing around upstands, pipe collars and roof edges, that fail first as the felt ages and shrinks. EPDM is supplied as a single large rubber sheet, so most garage roofs, porches and extensions can be covered with no joints at all, and even wider roofs need far fewer seams than a felt system would. Fewer joints simply means fewer places for water to find a way in over time.

GRP (fibreglass) roofing cures into a rigid shell, which looks smart but can crack if the timber deck beneath it flexes or moves slightly, something that happens naturally as roof timbers respond to damp and temperature changes. EPDM stays flexible once installed, so it can cope with a small amount of deck movement without splitting or cracking, which suits many of Bristol's older extensions and outbuildings. It also avoids the strong resin smell that comes with laying GRP, worth knowing if the roof sits close to windows or a garden room in use.

What Happens on Installation Day

A typical EPDM install starts with stripping the old covering back to the roof deck and checking the timber underneath for soft or rotten sections, which are repaired or replaced before anything else happens; skipping this step is where cheaper jobs often go wrong. Trims and drip edges are fixed around the perimeter, the rubber membrane is rolled out and left to relax so it beds in without stretching, then bonded down with contact adhesive and dressed neatly into upstands, gullies and any outlets. For a typical garage or single-storey extension roof, the job can often be completed within a day, weather and access allowing; larger or more complex roofs with multiple upstands and outlets will take longer. Costs depend heavily on roof size, access and detailing, so rather than quote a figure that won't fit your roof, Brunel Roofing Bristol offers a free, no-obligation inspection and fixed quote before any work starts.