Roof windows on Bishopsworth's hipped tiled roofs
Hipped tiled roofs give plenty of slope for a roof window, but the position needs thought. We look at where the rafters run and how the window will sit against the hip and ridge, so it is neither cramped nor exposed to the worst of the wind. Open, higher ground leaves roofs here facing the wind directly, and weak spots tend to show after the first hard gale.
On an exposed estate the flashing around each window has to be well fitted. A kit matched to the roof tiles keeps wind-driven rain out, and a poor flashing or tired seal is the most common cause of a leaking roof window here. Estates of semis from the same era share the same build and the same likely faults, which helps us predict what to check.
Opening up the roof may mean trimming a rafter and doubling up timbers beside it, which we confirm on site. Lining, insulation and a vapour control layer round the opening keep the room warm and cut condensation. Garages and hips add more edges and joints to the roof, and each of those is a place the weather works at.
Roof window jobs in Bishopsworth
- New roof window installation. A window is fitted into the slope with a flashing kit for your tiles, and the opening is lined and insulated inside.
- Replacing old roof windows. Leaking or worn windows are taken out and replaced, with flashing and covering renewed so the new unit is weathertight.
- Windows for loft conversions. Windows for new loft rooms are planned alongside rafters, insulation and vapour control for a finished room that performs well.
- Leak diagnosis. We check the flashing, sealing, condensation and surrounding tiles, as the glass itself is rarely the cause of a leak.
- Misted glazing. When moisture appears between the panes the sealed unit has failed, and we replace the glazing or window.
- Lining and insulation. Reveals are lined and insulated with a vapour control layer, giving a neat finish and reducing condensation.
How we fit roof windows in Bishopsworth
We look in the loft first, at rafters, insulation, headroom and where you want light. Outside we check the tiles and decide how the flashing will sit. Access from the garden is usually straightforward, and we protect the room below while the opening is formed. Access from the garden or drive is usually simple on these estates, which keeps the job straightforward.
You are told what the work involves before we cut, including any framing changes. Altering a roof slope or converting a loft may need planning or Building Regulations checks — we advise before work starts. We leave drives and paths clear and tidy at the end of each day. We protect the room below and make the opening weathertight at the end of every day.