Roof Windows on Emersons Green Homes
Concrete tile roofs on estate homes are fairly regular, which suits roof windows, but each tile profile affects the type of flashing kit we need. A kit made for slate will not seal properly against a deep concrete profile. Choosing the right kit is part of the job, not an afterthought. This is part of the planning.
Newer roofs are often framed with trussed rafters, which are designed as a whole structure. Cutting an opening in them needs care, and we check the framing on site, rather than assume, to see what strengthening or trimming the opening needs. Without that check, an opening can compromise the roof around it. The framing is checked first.
Windows added to a loft room should come with a tidy lining and insulation inside the opening. On modern homes, with their warm roof spaces, getting the vapour control right helps limit condensation on the lining and glass. A tidy lining makes the finished room feel complete. We also look at the daylight each opening would give the room.
Roof Window Services in Emersons Green
- New VELUX and similar roof windows. Fitting a new roof window into a concrete tile roof, with a matching flashing kit and a neatly finished opening inside.
- Replacing old roof windows. Removing a tired or leaking window and fitting a new one, with a fresh flashing kit sealed into the surrounding tiles.
- Loft room and conversion windows. Positioning windows to suit a loft room or conversion, with openings sized for headroom, furniture and ventilation.
- Leak and flashing investigation. Working out whether water is getting in at the flashing, the sealing, through condensation or from the tiles beside the window.
- Sealed-unit replacement for misting. Replacing the glass unit when a roof window has misted between panes, or the whole window if the frame is also worn.
- Lining, insulation and vapour control. Finishing the opening with a lining, insulation and vapour control so the room stays dry and free of condensation.
How We Fit Roof Windows in Emersons Green
We start by looking at the tile profile and the loft structure. If the roof uses trussed rafters, we check how an opening can be framed. Most estate roofs can be reached by scaffold or a tower at the rear or side without trouble. We keep the room covered and tidy while the roof is open.
The work then follows a set order: open the roof, frame the opening, fit the window and flashing, make good the tiles and finish the inside with insulation and lining. Any planning or Building Regulations point for a new opening is raised early, before the work starts. We talk you through each stage.