Fascias and soffits on Pucklechurch village houses
The older stone and brick cottages around the centre of Pucklechurch often have timber boards that have been painted many times. Gutters on these houses may have been dripping at a joint for years, and the rot behind the paint can be far worse than the surface suggests. It is a small detail with a real effect on the loft.
On older homes we check what the existing soffit boards are made of before we disturb them, and we handle them accordingly. Once cleared, we fit vented soffits or vent strips so air can move through the roof space, which helps with condensation in the loft. Nothing is started until you know what the boards are.
The later infill houses are usually simpler, with plain boards and regular eaves, so replacement is straightforward. Properties on the open edges of the village see more wind-driven rain, and gutters there need to be fixed firmly and run cleanly into the downpipes. Neat, level boards make the house look cared for. Getting the fall of the gutters right matters as much as the boards.
Fascia and soffit work in Pucklechurch
- Full fascia and soffit replacement. Old boards and gutters are removed, rafter ends and eaves are checked, and new UPVC fascias and soffits are fitted right round the roof.
- Bargeboards at gable ends. Gable-edge bargeboards on cottages and village houses are replaced so the roof edge is finished neatly and protected from rain.
- Vented soffits and vent strips. Soffits with ventilation built in, or discreet vent strips, allow the roof space to breathe and cut condensation in the loft.
- Gutter replacement alongside. New gutters fitted with the boards remove the old leaking joints that often soak and rot the fascia in the first place.
- Capping over or replacing. Where the timber is sound, UPVC can be fitted over it; where it has rotted, we take it out and replace it properly.
- Repairs and partial replacement. If only one side or a section of boards has failed, we replace those parts and match the finish as closely as we can.
How we fit fascias and soffits in Pucklechurch
Scaffold or safe access is needed along the eaves, and we plan this first, taking into account the shape of the house and the ground around it. Then the old boards and gutters come off, and we look carefully at the rafter ends and eaves before anything new goes up. We take our time over the corners and joints.
We tell you what we find before we fit. White is the usual finish, but darker and wood-effect colours are available, and we can talk through what suits an older cottage or a newer home. Gutters are refitted or replaced to suit, and the eaves are left ventilated. That is simply good practice on a house of that age.