Why Yate houses suit new UPVC boards
The late 20th-century estates in Yate were built with timber fascias and soffits that have now been painted, patched and repainted over several decades. By now many are soft at the joints and corners, and replacing the whole run is usually better than chasing individual rot spots. Short runs over porches and garages tend to be forgotten, and they rot just as the main boards do.
Gables are a feature of these houses, so bargeboards need replacing along with the fascia, or the roofline ends up mismatched. Porches and garages have their own short runs of board, and we do those at the same time. Where gutters have leaked, the board behind them is usually the first to go. We take the old boards away with us. Replacing the lot at once keeps the finish consistent all round the house.
The older core has a mix of eaves details, so the approach differs from house to house. Where a soffit looks older, we check what it is made of before disturbing it. New boards are simply wiped clean from then on. Each of these details is checked on the day rather than assumed.
Fascia and soffit work we carry out in Yate
- Full fascia and soffit replacement. Stripping old boards and gutters, inspecting rafter ends, and fitting new UPVC fascia and soffit around the whole house.
- Bargeboards on gables. Replacing the boards along gable edges to match the new fascias, so the whole roofline looks consistent.
- Vented soffits and vent strips. Letting the roof space breathe through ventilated boards or strips, which helps limit condensation in the loft.
- Gutter replacement. Fitting new gutters and downpipes on the fresh boards so water drains properly and nothing sags.
- Porch and garage boards. Replacing the shorter runs of board on porches and garages, so every edge of the house is finished alike.
- Capping and partial repairs. Capping over sound boards or replacing only the worst sections, when a full replacement is not needed.
How we replace fascias and soffits in Yate
We start by walking round the house and showing you which boards are failing and why. Access is arranged, usually with scaffold or a tower depending on the height. Old boards and gutters come off, and we check the rafter ends and eaves before anything new is fixed. You see the condition of the eaves before the new boards go on.
New boards go on with vented soffits or vent strips, and the gutters are refitted or replaced. You choose the finish, white, a darker colour or wood-effect, and we leave the drive tidy. If a board is sound, we say so rather than replace it for the sake of it.