Roof windows on Brislington's semis and older houses
On a hipped roof the slopes are smaller than on a plain gable, so we think carefully about where a window can go without crowding a hip or a ridge. Positioning is decided on site, after looking at the loft from underneath. Hips, ridges and chimneys all affect where a window can sit.
Rafters sit in the way of the opening. They may need trimming and doubling up to frame it, which we check in the loft before we promise a size. Older village-core houses can have earlier timbers and coverings, so we take extra care to see what we are cutting into. That is checked, not assumed.
Roofs here are tiled, and each window needs a flashing kit matched to that covering. If you already have a window that leaks, the glass is seldom to blame: it is usually flashing, sealing, condensation or the tiles around the frame, while misting between the panes means a failed sealed unit. Telling those apart saves replacing a window that was never at fault.
Roof window work in Brislington
- New roof window installation. Opening the roof, framing the rafters and fitting a roof window with a matched flashing kit and neat internal lining.
- Loft conversion roof lights. Positioning and fitting windows for a loft room so it gets proper daylight and ventilation on a hipped or gabled roof.
- Replacement of old windows. Removing an ageing roof window and fitting a new one with fresh flashings to suit the tiles around it.
- Leak diagnosis and re-flashing. Finding the real cause of a drip, then renewing flashings and seals instead of replacing the window unnecessarily.
- Misted glass replacement. Replacing a failed sealed unit when the frame and its surround are still sound and well fixed.
- Insulation and vapour control. Lining the opening and fitting insulation with a vapour control layer to limit condensation round the window.
How we plan a roof window in Brislington
We look at the roof from outside, then go into the loft to see the rafters, the insulation and the room you have to work with. From that we suggest a position and size, and explain any structural work needed around the opening. We then agree the position with you.
Roof window work may need planning or Building Regulations checks, and we advise before work starts. Then the tiles are lifted, the opening framed, the flashing and window fitted and the inside lined and finished. On the day we take care of the loft floor and tidy up as we go, leaving the room ready to decorate and use afterwards.