Roof windows in Hengrove bungalows and semis
Hengrove has a lot of bungalows, and a roof window is one of the neatest ways to make their roof space useful. A bungalow loft often needs good ventilation and light, and a well-placed window does both without the cost and mess of a dormer. Ventilation matters in a low roof space, so the position of the window is worth planning carefully.
The inter-war and post-war semis have solid, regular roofs, and conversions there are common. Hipped roofs mean the windows must sit between the hip lines, and rafters may need trimming and doubling up around the opening, which we check on site before we cut. Where a roof is trussed rather than traditionally framed, the options are narrower, and that is part of the reason we check before promising a position.
Modern infill houses sometimes have trussed roofs that cannot be altered the same way, so we look at the structure first. Across all these types, we match the flashing to the covering, and we replace older windows whose seals have failed and misted over. The lining and insulation around the opening then finish the job from inside.
Roof window jobs in Hengrove
- Roof windows in bungalow lofts. We frame the opening, fit the window and flashing and complete the lining, bringing light into otherwise dark bungalow roof spaces.
- Loft conversion windows. In semi-detached loft conversions, windows are placed for light and ventilation, with insulation and vapour control finished around each opening.
- Replacement of old windows. Old roof windows with tired flashings or failed seals are removed and replaced, with the surround checked before the new unit goes in.
- Dormer roof windows. Windows can be set into dormer cheeks or roofs, subject to a structural check and suitable detailing of the covering.
- Leak investigation. When a roof window leaks, we look at flashing, sealing, condensation and the covering around it before blaming the glass.
- Misted glazing. A window with moisture between the panes has a failed sealed unit, and we explain whether to replace the glazing or the whole window.
How we fit a roof window in Hengrove
We begin in the loft, studying the rafters, the roof structure and the room height, then examine the covering outside to choose the right flashing kit. This is all checked on site, as plans seldom show how a roof was actually built. We then agree the position of each window and how it looks from outside.
After fitting the window, we complete the lining, insulation and vapour control so the new opening is warm and sealed. Planning or Building Regulations checks may apply to some lofts, and we advise before work starts. Where an old window is being replaced, we also check the surrounding tiles and flashing before reusing anything, because a new unit in a worn surround soon leaks again, and we explain what we find before going ahead.