Fascias and soffits on Hengrove's estates
Much of Hengrove is made up of inter-war and post-war semis and short terraces with plain, repeating eaves. Original timber boards on these houses have often had decades of repainting, and failed paint, bowed boards and stained soffits are the usual reasons people call. Repeating the same job along a row of similar houses has taught us where those boards usually fail first.
Bungalows are common, and their low eaves are within sight of every passer-by, so a tired fascia is visible. They are also easier to reach, which can make the job quicker, though we still use proper access equipment so the boards go on straight and secure. That makes them quick to do but does not remove the need for checking the rafter ends carefully.
Hipped roofs run fascia around the whole house instead of only front and back, and gable-ended houses add bargeboards. On any older house, we check what existing soffit boards are made of before disturbing them, and work to suit what we find. Getting the corners and joints right on a hip is what makes the finished edge look tidy from the road.
Fascia and soffit jobs in Hengrove
- Full fascia and soffit replacement. We remove old boards and gutters, check rafter ends and fit new UPVC fascia and soffit boards around the entire roof edge.
- Bargeboards on gable ends. Where a house has gable ends, rotten bargeboards are replaced in UPVC to give the sides of the roof a clean, sealed edge.
- Vented soffits and vent strips. Ventilated soffit boards or vent strips let the roof space breathe, which reduces condensation and damp in the loft.
- Gutters fitted alongside. New gutters and downpipes go on with the boards so the fall is right and the fascia is only disturbed once.
- Capping over or replacing. Capping can suit boards that are still sound, while damaged ones are replaced so rot is not simply covered over.
- Repairs and partial replacement. A single failed length of fascia or a section of soffit can be renewed without replacing the entire roof edge.
How we fit fascias and soffits in Hengrove
We begin with a look at the boards, gutters and eaves from the ground and from access equipment. Scaffold or a tower goes up before work starts, because it keeps the work safe and lets us handle long lengths of board properly. That also gives us a close look at the eaves.
We explain whether capping or replacement suits the house, and talk through colour, with white the usual choice and darker or wood-effect available. Then the old boards and gutters come off, rafter ends are checked and new UPVC is fitted. We clear away old boards as we work and leave the site tidy, so nothing is left unfinished at the end of the day.