Roof windows in Old Market's older and newer buildings
Georgian and Victorian terraces here have pitched roofs with solid old timbers, and rafters may need trimming and doubling up around a new opening. We check the timbers and loft layout on site first, since older structures have been altered many times and rarely match a standard drawing. That is normal for buildings of this age.
Newer flats and some older commercial conversions often have flatter pitches or flat roofs, where a different type of roof window or a flat-roof rooflight may be the right answer. We look at the covering and the pitch, then recommend a window that will drain and seal correctly for that roof. That choice matters more than the brand on the frame.
Working in the middle of the city affects how windows are fitted. Narrow frontages, shared walls and limited space for lifting mean that access and deliveries need planning. Loft and top-floor work may need planning or Building Regulations checks — we advise before work starts. Early planning of that kind avoids delays once the work starts.
Roof window work we do in Old Market
- New roof windows in pitched roofs. Forming an opening between the rafters and fitting a VELUX or similar window with the flashing kit made for your roof covering.
- Replacing old roof windows. Replacing worn, leaking or stiff windows, and putting right the flashing and roof covering around the old opening.
- Windows for loft conversions. Positioning windows so a loft room gets good light and ventilation, with lining and insulation finished properly around each one.
- Rooflights on flatter roofs. Advising on and fitting roof windows or rooflights on low-pitched and flat roofs, where drainage and sealing need extra care.
- Leaks around existing windows. Tracing water to the flashing, sealing, condensation or covering around a window, since the glass itself is seldom the culprit.
- Misted sealed units. Dealing with misting between panes, which means a failed sealed unit, by replacing the unit or the whole window.
How we fit roof windows in Old Market
We start inside, in the loft or top-floor room, checking rafters, insulation and where light is wanted. Then we look at the roof covering outside, which sets the flashing kit and the way the opening is formed and sealed. You will see the proposed position marked out before any cutting.
We explain the access arrangements we need for a city site, including scaffold, deliveries and keeping the roof watertight while the opening is made. If you called because of a leak, we tell you honestly whether the window, flashing or covering is to blame. You can then decide with the full picture.