Fascias and soffits on Keynsham's mixed housing
Keynsham has Victorian and Edwardian houses close to the older high street, and extensive inter-war, post-war and modern estates beyond. The boards vary widely, from deep timber fascias on older homes to narrow ones on estate houses. Overflowing or leaking gutters make matters worse, because water runs down the back of the board and keeps the rafter ends damp.
On inter-war and post-war semis, long straight runs at the front and back are common, so a full replacement is often practical and tidy. Bargeboards at gable ends are also worth renewing at the same time, since they take the weather from the side. Some houses have rendered or cladded gables, and we check how the bargeboards meet them so the new boards seal neatly.
With Cotswold stone and tile roofs in the area, we take care at the junction between boards and covering. On older homes we check what existing soffit boards are made of before disturbing them, and proceed once we know. Correct fixing and venting matter just as much as the boards themselves, so we never skip that stage of the job.
Fascia and soffit work in Keynsham
- Full fascia and soffit replacement. Old boards and gutters come off, rafter ends and eaves are checked, and new UPVC fascias and soffits are fitted along the run.
- Bargeboards on gables. Rotten or peeling bargeboards at gable ends are replaced with UPVC boards that match the fascia.
- Vented soffits and vent strips. Ventilation built into the soffit or fitted as strips lets air move through the roof space and helps prevent damp.
- Gutters renewed alongside. New gutters and downpipes can be fitted with the boards, which saves doing the eaves twice.
- Capping over or replacing. If the timber is sound, capping over is an option; if it has rotted, we remove and replace it.
- Repairs and partial replacement. Where only a short run has failed, we replace that section, such as a corner or one side of a porch.
How we replace fascias and soffits in Keynsham
We look at the eaves, gutters and gables, then explain whether capping or full replacement suits the house. Scaffold or proper access is arranged, because boards and gutters cannot be fitted well from a ladder. Our priority is to find any rotten rafter ends before new boards hide them, because boards fixed to weak timber will not last.
On the day, old boards and gutters come off, rafter ends are checked for rot and the new boards go on with vented soffits. White is standard, though darker and wood-effect finishes are available if you prefer. You get a tidy finish and a clear account of what was found, so nothing is a surprise once the old boards come off.