Roofline boards on Redland properties
Large houses have long runs of eaves and gable edges, and any weak point in the guttering sends water against the board behind it. Where that happens repeatedly, the timber softens and rots, and the rafter ends behind are sometimes affected as well. That is why we always look behind the board and not just at its face.
Many Redland houses have tall chimneys, lead-lined gutters and decorative gables, so the roofline has more detail than a standard semi. Bargeboards can be large and need careful measuring, and boards at awkward heights and corners have to be cut and joined neatly. Taking careful measurements first avoids awkward joints and gaps once the boards are up.
Height means access is serious, with scaffold needed on most large houses. On older homes we also check what the existing soffit boards are made of before disturbing them, and handle them accordingly. We plan the scaffold and the order of work in advance. It is a steady, careful job that protects both the house and the crew.
Fascia and soffit jobs in Redland
- Full fascia and soffit replacement. Old boards and gutters are removed, eaves and rafter ends checked, and new UPVC fascias and soffits fitted along the whole roofline.
- Bargeboard replacement. Larger bargeboards on gable-fronted villas are measured, replaced and finished in UPVC so the sloping edges match the eaves.
- Vented soffits and vent strips. New vented soffits or vent strips let air through the eaves into the roof space, helping it breathe and stay dry.
- Gutter replacement alongside. New or refitted gutters go on with the boards, which saves a second round of access and gives water a clear path away.
- Capping over or replacing boards. Where old boards are sound beneath, capping can suit; where they are rotten we remove and replace. We explain which applies.
- Repairs and partial replacement. If only a length or two has failed, we replace that section and make the join tidy rather than stripping the whole house.
How we replace fascias and soffits in Redland
We look at the boards, gutters and rafter ends from a safe position and talk through whether you need full replacement, capping or a smaller repair. White is common, and darker and wood-effect finishes can sit well against Victorian and Edwardian brickwork. We explain each stage as it goes.
On the day, old boards and gutters are removed, the eaves and rafter ends are checked, and anything unsound is dealt with before the new boards go on. Scaffold is arranged first, and the roofline is left tidy with the gutters running properly. Nothing is boxed in until we are sure what lies behind it.