Fascias and soffits on hipped Ridgeway roofs
A hipped roof runs eaves round three or four sides, so a Ridgeway house has more fascia and soffit than a simple gable end would suggest. The rot often starts at a corner or beside a downpipe, where the gutter has overflowed for a long time, then creeps along the board. Corners are worth a close look.
Garages and extensions add more eaves. Many of those boards were put on in a different decade from the main house, in different timber, and they fail at different rates. It is common to find the main roof boards tolerable while the extension boards are soft and crumbling. Each run is judged separately.
On older houses we check what the existing soffit boards are made of before we disturb them, and we handle them accordingly. Once the old boards are off, we look at the rafter ends and eaves, deal with any damp timber, then fit the new boards and ventilation. Nothing is rushed or assumed.
Fascia and soffit work in Ridgeway
- Full fascia and soffit replacement. Removing the old boards and gutters, checking the rafter ends, and fitting new UPVC fascias and soffits all round the house.
- Bargeboard replacement. Renewing the gable-edge boards on end-of-terrace and semi-detached houses where the old timber has split or rotted.
- Vented soffits and vent strips. Fitting ventilated soffit boards or eaves vent strips so air moves through the roof space and condensation is kept down.
- Gutter replacement alongside. Replacing worn or leaking gutters and downpipes at the same time, since they have to come off to do the boards properly.
- Capping over existing boards. Covering sound fascia boards with UPVC where the timber behind is healthy, instead of stripping everything out.
- Repairs and partial replacement. Cutting out a rotten section by a downpipe or corner and fitting new boards without renewing the whole house.
How a fascia and soffit job runs in Ridgeway
We look at the existing boards from the ground first, then at the rafter ends once the boards are off. Scaffold or a tower is normally needed for safe access, and we set that up before any work starts. We explain what we find so you can see why a board has to go.
The old fascias, soffits and gutters come off together, any soft rafter ends are dealt with, and the new boards go on with vents built in. Colours include white, darker shades and wood effect. We tidy the drive and garden as we go and leave the gutters running properly.