Roof windows on Ridgeway's hipped roofs
A hipped roof has sloping sides on every elevation, which gives more places to put a window than a plain gable. That helps in Ridgeway, where side and rear slopes can take roof windows without them showing from the street. The positions still need to suit the rafters and the room below. We confirm all that from inside the loft.
Many houses here have had a garage or extension added, and the loft above the original house is often the part people want to use. A roof window over the stairs or in a rear bedroom slope is the usual choice, and we check the structure before settling on a position. That is a sensible first step.
Older windows in this area often fail at the flashing, the seal or the covering around them rather than the glass. If one has been leaking or misting between the panes for a while, replacement is usually simpler than repeated sealing, and we can tell you after a proper look. We do not guess at it.
Roof window work we do in Ridgeway
- New roof window installation. Cutting the opening, trimming and doubling up rafters where needed, and fitting the window with a flashing kit matched to your roof covering.
- Replacing old roof windows. Taking out a leaking, misted or worn-out roof window and fitting a new one into the existing opening wherever the size allows.
- Loft conversion windows. Supplying and fitting roof windows as part of a loft conversion, with lining, insulation and vapour control sorted around each opening.
- Flashing and seal repairs. Putting right leaks that come from flashings or sealing rather than glass, where the window itself is still in good order.
- Misted unit replacement. Dealing with windows that mist between the panes, which means the sealed glazing unit has failed and needs replacing.
- Rear slope and side slope windows. Positioning windows on the side and rear slopes of a hipped roof so they bring in light without altering the street view.
How we fit a roof window in Ridgeway
Before anything is cut we look at the rafters, the loft space and the roof covering. The window has to be matched to a flashing kit for your tiles, and the rafters may need trimming and doubling up around the opening. We check all of that on site and explain it first.
Once the window is in, we line the opening, insulate around it and fit the vapour control so condensation does not collect round the frame. Work on the roof is done from safe access, and we keep the room below protected. Some fittings may need planning or Building Regulations checks, and we advise before work starts.