Eaves and gable boards on tall Sneyd Park roofs
Tall roofs mean tall eaves, and nobody inspects them from a ladder every year. By the time paint is peeling or a gutter is sagging, the board behind has often been wet for a long time. On villas here, we regularly find the rot well advanced before the owner notices. Nothing is added to the job unless we can show you why it is needed.
Mature trees keep gutters full of leaves, and an overflowing gutter soaks the fascia and soffit behind it. The gable bargeboards, exposed to wind above the gorge, split and open up at the joints. Dark, damp, shaded eaves also encourage moss, algae and nesting in gaps. You are welcome to ask questions at any stage of the work.
Older houses of this age call for care. We check what the existing soffit boards are made of before disturbing them, and we handle them accordingly. Once they are off, we examine the rafter ends and the eaves, deal with any damp timber, then fit new boards with ventilation. We keep the work area tidy and protect paths, drives and gardens as we go.
Fascia, soffit and bargeboard work in Sneyd Park
- Full fascia and soffit replacement. Removing old boards and gutters all round the villa, checking rafter ends, and fitting new UPVC fascias and soffits.
- Bargeboard replacement. Renewing the gable-edge boards on tall gables, where wind and weather have split or loosened the old timber.
- Vented soffits and vent strips. Fitting ventilation at the eaves so the large roof space breathes and condensation does not settle on the timbers.
- Gutter replacement alongside. Replacing old gutters and downpipes at the same time, with outlets and falls arranged to cope with leaf fall from nearby trees.
- Capping over existing boards. Covering fascias with UPVC where the timber beneath is sound, avoiding unnecessary stripping on long eaves runs.
- Repairs and partial replacement. Replacing rotten lengths under a leaking gutter or at a corner without redoing the whole house.
How we carry out eaves work on a villa
Scaffold is almost always needed for eaves at this height, and on steep ground it has to be set up with care. We arrange that first, and then inspect the boards close up. We show you what we find, so you can see why a board needs to be replaced.
The old boards and gutters come off together, any damp rafter ends are dealt with, and the new UPVC goes on with vents built in. White is common, with darker and wood-effect finishes available. Gardens and borders are protected, and we leave the gutters running clear. If we find something unexpected, we stop and talk it through with you first.