Roof windows in Ashley Down terraces and semis
Long Victorian and Edwardian terraces here are often given rear dormers or loft rooms, and a roof window on the back slope is a common alternative. Rear slopes are less visible and make good use of the roof space. A back-slope window also keeps the front of the house looking as it always has, which matters in a street of matching terraces.
Inter-war semis have generous roofs that suit a window or two, and their simpler pitches make the flashing work more direct. In both house types, the existing covering of tile or slate decides which flashing kit is needed. Some of these roofs already have a loft room, and replacing a tired window there is a different job from cutting a fresh opening.
Because the rows are tight, access matters. We think about how the old window comes out, how the new one goes in, and how the roof will be kept dry in between, particularly where a terrace has little space at the rear. The slope, the covering and the age of the roof all affect the detail, and we explain our choices as we go.
Roof window work in Ashley Down
- New roof window in a terrace loft. A new opening is cut and framed on the rear slope of a terrace, flashed to suit the covering and lined neatly inside.
- Replacing an old window. Existing roof windows that leak, stick or have misted are taken out and replaced, with new flashing so the surround is sealed again.
- Loft conversion windows. Windows for a loft room are placed for light and headroom, with rafters trimmed and doubled up where our on-site checks show it is needed.
- Flashing kit selection. Each window is paired with a flashing kit made for your tile or slate, so water is led over the covering and away from the opening.
- Misted glass units. Misting between panes means the sealed unit has failed. We replace the unit or the window without disturbing more of the roof than necessary.
- Leak tracing near windows. Leaks around a roof window usually come from flashing, sealing, condensation or the nearby covering, so we trace the real cause first.
How we fit roof windows in Ashley Down
We begin in the loft, looking at rafters, insulation and where the opening can go without weakening the roof. Rafters may need trimming and doubling up, and we confirm that on site rather than assume it from the street. That check also shows us the state of the timbers and insulation around the area, which we tell you about.
Outside, we match the flashing to the covering and plan how to protect the open roof while the window goes in. Inside, lining, insulation and vapour control are fitted so the room is warm and free of condensation. Careful sequencing keeps the loft protected throughout, and the room is left tidy and ready to use.