Roof windows in Bedminster's Victorian and Edwardian roofs
Terraced roofs in Bedminster run front to back with a ridge between, which suits roof windows on either slope. Loft rooms in these houses are often lit only from the gables or not at all, so a window on the back slope can change a room completely. Bay windows, lean-tos and rear additions mean the back of a Bedminster house often tells us more than the front does.
The roof timbers in older houses vary. We check rafter spacing and condition on site, because forming the opening may mean trimming a rafter and doubling up the timbers beside it. That is decided once we are in the loft. Rows of similar houses share their age and detailing, so a fault on one roof is a fair warning for the next.
If your loft is being converted, or an old roof window has begun to leak or mist, we look at the surrounding covering and flashing as well as the glass. Most leaks come from the flashing and sealing, or condensation, not from the glass. Access down narrow rear routes is part of the planning here, and we sort it out before any work starts.
Roof window jobs in Bedminster
- New roof window installation. A new window is fitted into the roof slope with a flashing kit that matches your tiles or slates, and the opening is lined inside.
- Replacing old roof windows. Tired windows are taken out and replaced with new units, with the flashing and surrounding covering renewed so the new window sits properly.
- Loft conversion roof windows. Windows for new loft rooms are planned with the rafters, insulation and vapour control around each opening.
- Leaking window repairs. We trace the leak to the flashing, sealing, condensation or the covering around the window, and repair what is actually at fault.
- Misted glazing. When moisture appears between the panes, the sealed unit has failed, and we can replace the window or glazing as suits the age of the frame.
- Lining and insulation. The reveals inside are lined and insulated with a vapour control layer, giving a tidy finish and cutting down on condensation.
How we fit roof windows in Bedminster
We look at the loft first: rafters, insulation, how much headroom and light you want. Outside, we check the covering and decide how the flashing kit sits on it. Materials are carried up through the house or from the back, depending on what access allows. Tight rear access is the main practical question on these streets, so we deal with it first.
You get a clear description of what the opening involves, including any framing work found once the roof is opened up. Altering a roof slope may need planning or Building Regulations checks — we advise before work starts. We keep the work tidy for neighbours in the terrace. We protect the room below and make the opening weathertight at the end of every day.