Roof windows in Georgian and Victorian Clifton
Steep slopes help and hinder. They give good headroom close to the eaves and make a roof window easy to light from, but they also make access harder and flashing work more demanding. We plan scaffold and working positions before starting anything on a steep pitch. Careful planning at that stage avoids trouble later.
Slate is the common covering here, and the flashing kit has to be matched to it. A kit made for a different covering will not seal properly. Leaks around roof windows usually come from flashing, seals, condensation or the covering round them, not from the glass. A good installation takes that seriously.
Many Clifton buildings are listed or in a conservation area, which can limit where windows go and what they look like from the street. Rear slopes are often easier than front ones. Some work may need planning or Building Regulations checks, and we advise before work starts. Rear slopes often make for a simpler and neater result.
Roof window work in Clifton
- New roof window installation. The opening cut, rafters trimmed and doubled where needed, the frame flashed for slate and the lining finished inside.
- Replacing old roof windows. Old or leaking units replaced, with the flashing and surrounding slates renewed so the new window sits properly.
- Attic and loft conversion lighting. Windows positioned for a converted attic, taking account of headroom, outlook and how the room will be used.
- Rafter trimming and support. Rafters trimmed and doubled up around the opening, as checked on site, to keep the roof structure sound.
- Leak and condensation checks. Flashing, seals and nearby slates inspected first, because the glass is seldom the cause of a leak.
- Misted unit replacement. Where the sealed glass has failed and misted, we advise on replacing the unit or the whole window.
How a roof window job goes in Clifton
We begin with the roof covering, the slope and the room below. On site we check the rafters, plan how they will be trimmed and supported, and confirm the flashing kit that suits the slates, before any opening is marked out. All of this is settled before any slate is lifted, so the work is planned rather than improvised.
Inside, we plan the lining, insulation and vapour control around the frame so it is neat and performs well. Scaffold or other safe access is arranged for the height, and we explain each stage so nothing comes as a surprise. Questions are welcome at every stage. Questions are welcome.