Fascia and soffit work on tall Clifton buildings
Georgian and Victorian terraces and villas in Clifton reach three or four storeys, and the eaves are a long way up. Painting fascias there means repeated access costs, which is a good reason to choose a very low maintenance board for the next round of work. It also means fewer disruptions for anyone living below.
Many of these buildings are listed or in a conservation area, and eaves details can vary from one house to the next, with deep boxed cornices, moulded timber or plain boards. Before we change anything we look at what is there and discuss what suits the building, because some work may need planning checks. Each gets a different answer.
Older houses also need care in how boards are removed. We check what the existing soffit boards are made of before disturbing them, as a calm routine step. Then we inspect the rafter ends and the wall plate for damp, and deal with any decay before fitting new boards. New boards are only as good as the timber behind them.
Fascia and soffit options for Clifton homes
- Full fascia and soffit replacement. Old boards and gutters taken off, rafter ends checked, then new UPVC fitted along the eaves with scaffold in place.
- Bargeboards on gables. Gable-edge boards replaced in matching UPVC so the sides of the roof are finished to the same standard as the eaves.
- Vented soffits and vent strips. Ventilation built into the eaves so the roof space breathes, helping keep timbers and insulation dry.
- Gutter replacement alongside. New gutters and downpipes fitted while access is up, instead of paying for scaffold twice.
- Capping over or replacing. If the timber is sound, UPVC can cap it; if there is rot, the old board is removed and replaced.
- Repairs and partial replacement. One failed board or a short run replaced without disturbing the rest, where the remainder is in decent order.
How we run a fascia job in Clifton
Access comes first. On tall terraces we put up scaffold sized to the building so the work at eaves height is safe and tidy. Gutters and old boards come off, and we look at the rafter ends and the eaves behind them before anything new is fitted. Nothing goes up that has not been inspected first.
Boards go on in white, or in darker and wood-effect finishes if they suit the house better. Vented soffits are included where the roof needs air movement, and the gutters are refitted or replaced and checked to run cleanly to the outlets. We tidy the site as we go and clear the scaffold when the job is done.