Roof Windows on Filton's Hipped Roofs
A hipped roof slopes on every side, which gives plenty of choice for where a window goes. The front slope may be best for light, but the back slope is often better if you want the street view to stay as it is. That choice is made with you before work starts.
Inter-war roofs were framed with traditional rafters, and a new opening in one will usually mean trimming a rafter and doubling up the timbers around the gap. We check the sizes and spacing on site, not from guesswork. The result is a tidy opening that carries the load properly. That choice is made with you before work starts, as well as the position of the opening.
Post-war and newer homes in Filton may have different roof structures, so the approach is adjusted to suit. A loft that has already been converted may need a replacement window, with flashing and sealing renewed around the frame at the same time. We look at how the existing frame, lining and flashing are holding up before deciding what to replace.
Roof Window Services in Filton
- New roof windows for lofts. Cutting in a new window to bring daylight and ventilation to a loft room, with the rafters adjusted and the flashing fitted.
- Replacement of old windows. Taking out a worn, leaking or stiff roof window and fitting a new one with a fresh flashing kit for the roof covering.
- Windows for loft conversions. Placing windows in a conversion so the room has headroom, daylight and ventilation, with openings sized for the layout.
- Leak investigation and flashing repairs. Finding whether water enters through flashing, sealing, condensation or the roof covering beside the window, then repairing the actual cause.
- Misted sealed-unit replacement. Dealing with misted glass between the panes, which means a failed sealed unit that needs replacing instead of cleaning.
- Lining, insulation and vapour control. Finishing the inside of the opening with lining, insulation and a vapour control layer, so the room stays dry and snug.
How We Install Roof Windows in Filton
First we examine the covering, the slope and the loft interior: rafter positions, headroom and what has to change. Open streets and drives make scaffold or a tower straightforward in most cases, and we agree where it goes before starting. We also agree how the loft and rooms below will be protected during the work.
We confirm in the loft whether rafters need trimming and doubling up, then fit the window and flashing, make good the surrounding roof and line the opening with insulation and vapour control. Any planning or Building Regulations point is raised before work starts. We make sure the loft is covered and tidy as work goes on, and explain each stage as it happens.