Roof Windows in Greenbank Houses
On Victorian and Edwardian terraces, the roof slope at the rear is usually the better place for a window, since it keeps the front elevation unchanged. The rafters and the covering decide where the opening can sit, and we check them from inside the loft before agreeing a position. That check protects the roof around the opening.
Many terraced lofts have been converted already, and the roof windows in them may be decades old. Misting between the panes means the sealed unit has failed, while drips around the frame usually point to the flashing, sealing, condensation or the roof covering rather than the glass. Working out which fault you have avoids replacing parts that were fine.
The inter-war houses nearby offer simpler roof slopes that suit a window cleanly, and some have been extended into the roof space. Each loft and each slope is different, which is why we confirm rafter positions and covering type on site and not from a drawing. Measuring first avoids awkward surprises once the opening is cut and the tiles are lifted.
Roof Window Work in Greenbank
- New windows in pitched roofs. Cutting a new opening in the slope, framing it and fitting a roof window with the correct flashing kit for your tiles or slates.
- Replacing old roof windows. Taking out a worn or misting window and fitting a new one, with fresh flashing and sealing around the opening.
- Terraced loft conversions. Fitting roof windows to loft rooms in terraced houses, placed to give good daylight while keeping the front of the house unchanged.
- Leak investigation. Tracing leaks around an existing window to the flashing, sealing, condensation or surrounding covering, instead of assuming the glass is at fault.
- Dormer and extended lofts. Adding roof windows to dormers and extended roof spaces that need more light or ventilation than the existing glazing provides.
- Lining, insulation and vapour control. Completing the inside of the opening with a neat lining, insulation and vapour control to limit draughts and condensation.
How We Fit Roof Windows in Greenbank
Before cutting anything, we check the covering, the rafter layout and the loft space, and we agree the size and position with you. Where the rafters have to be trimmed and doubled up, we confirm that on site and explain what it involves. We do not cut anything until the plan is agreed.
The window is fitted with the correct flashing, and the lining, insulation and vapour control are completed at the same time. Some installations may need planning or Building Regulations checks, and we advise before work starts. We then explain how to keep the window ventilated so condensation does not return and the new lining stays clean, dry and free from damp marks.