Roof Edges on Greenbank Houses
On a Victorian or Edwardian terrace, the eaves run in one long line, and the gutters are often tied closely to the neighbours' on either side. A new fascia has to follow that line properly and keep the fall of the gutter right, or the finished edge will look uneven from the street.
Bay-fronted houses add small roofs of their own, with fascias and gutters that are easy to overlook. Those short runs rot just as readily as the main eaves, and we include them so the whole front of the house gets a matching finish. Getting those short runs right makes the front elevation look finished from the pavement, and it stops water finding its way behind the bay.
The inter-war houses nearby tend to have gables, with bargeboards at the ends as well as fascias along the eaves. Because older houses may have soffit boards of unknown material, we check what is there before disturbing anything. Scaffold goes up for safe access on the taller fronts. Please ask if the height worries you.
Fascia and Soffit Jobs in Greenbank
- Full replacement. Stripping old boards and gutters, checking the rafter ends and eaves, and fitting new UPVC fascias and soffits along the roof edge.
- Bargeboards on gables. Replacing split or peeling bargeboards on gable ends so the roofline is consistent from every side.
- Vented soffits. Fitting vented soffits or vent strips so air moves through the roof space and condensation is kept down in the loft.
- Bay roof fascias. Replacing the small fascias and gutters around bay roofs so the front elevation has a tidy, matching finish.
- New gutters and downpipes. Fitting new guttering alongside the boards, so the whole roof edge is done in one go with one set of scaffold.
- Capping and partial repairs. Capping over sound boards or replacing only a damaged section, where the rest of the roof edge does not need redoing.
How We Replace Roof-Edge Boards in Greenbank
We begin by looking at the existing boards, the gutters and what we can see of the rafter ends. If the timber behind is damaged, we explain that before work begins, because capping over rotten timber only hides the problem. Honest early advice saves you paying twice, and it lets you choose between capping and replacing.
The old boards and gutters come off, the eaves are checked, and the new boards, vented soffits and gutters go on. You choose white, a darker colour or a wood-effect finish, and we leave the roof edge level, clean and clear of debris. Afterwards we run through the gutters to check the joints and falls.