Roof Windows on Kingsweston's Post-War Roofs
Houses on the Kingsweston Hill and Lawrence Weston side are mostly post-war, with pitched tiled roofs and lofts that can often be put to use. Many of them have never had a roof window, so the first one is a real change. The simple pitched roofs found on many of these houses usually leave plenty of clear slope for a window.
Exposure counts. On open, higher ground the roof around a window sees plenty of wind and driven rain, so flashing has to be right for the covering and the surrounding tiles must be laid cleanly around the kit. Sites like this are windy, so the quality of the flashing around the window and the tiles laid back around it are what keep the rain out.
On homes that already have an older window, the usual complaint is a leak or condensation. These are more often flashing, sealing or the covering around the window than the glass, and misting between panes means the sealed unit has failed. A loft that has never been lived in often has little insulation at the eaves, and we look at that while we are up there.
Roof Window Work in Kingsweston
- New roof window installation. Cutting a new opening and fitting a roof window with the right flashing kit for your tiles, plus lining and insulation around it.
- Replacing old roof windows. Taking out leaking, misted or worn windows and fitting new ones, using the existing opening where it is sound.
- Loft conversion windows. Supplying and fitting roof windows for a loft room, positioned to give proper light, ventilation and an escape route.
- Flashing and leak repairs. Tracing leaks around an existing window and repairing flashing, sealing or the tiles around it without replacing the whole unit.
- Misted unit replacement. Replacing windows where moisture has got between the panes, which usually means the sealed unit has failed.
- Lining and insulation. Finishing the opening inside with lining, insulation and a vapour control layer so the reveal is tidy and stays dry.
How We Fit a Roof Window in Kingsweston
We start in the loft. A new opening may need rafters trimmed and doubled up, and we check that on site before anything is cut. We then match the window to a flashing kit made for your roof covering, because the wrong kit leaks however well the window is fitted. We tell you what the finished opening will look like from inside before the first tile is lifted.
Inside, the opening is lined and insulated, with a vapour control layer to limit condensation. We talk through size, position and finish first, and we explain whether the work may need planning or Building Regulations checks, which we advise on before work starts. Waste and old materials are cleared away each day, and the roof is left weathertight overnight.