Roof Windows in Lawrence Hill's Victorian Terraces
Victorian terraces here have steep roofs with long slopes, which suit roof windows in the rear slope especially. Rear roofs are usually less visible, and many terraces already have extensions or dormers behind them. Slate roofs are particularly sensitive to how the flashing is laid, and the kit must suit both the slate and its thickness.
Older roofs in slate or old clay tile need careful handling. The covering around the opening must be cut and relaid neatly into a flashing kit made for it, and rafters in an old roof may be different in size and spacing from modern ones. Many terrace lofts have not been used for decades, and we often find the insulation and ventilation need attention while we are up there.
Where windows already exist, the complaints are leaks and condensation. Most come from flashing, sealing or the covering around the window rather than the glass, while misting between panes means the sealed unit has failed. Windows set in a rear slope can look over yards and neighbouring walls, so we help you consider privacy and the light you will actually get.
Roof Window Work in Lawrence Hill
- New windows in terrace lofts. Forming an opening in the rear slope and fitting a roof window with the right flashing kit for slate or tile, plus lining and insulation.
- Replacing old roof windows. Removing worn or leaking windows and fitting new ones, using the existing opening where the framing is sound.
- Loft conversion windows. Fitting roof windows to light and ventilate a converted loft, positioned for the room layout and the roof structure.
- Misted unit replacement. Replacing windows where moisture has entered between the panes, which means the sealed glass has failed.
- Leak and flashing repairs. Tracing leaks to the flashing, sealing or surrounding covering, and repairing them without replacing a sound window.
- Rafter trimming and framing. Trimming and doubling up rafters around a new opening, checking the old timbers on site before any cutting begins.
How We Fit Roof Windows in Lawrence Hill
We begin in the loft, looking at the rafters, the head height and the condition of the old timbers. A new opening may need rafters trimmed and doubled up, and we confirm how before cutting. Then we choose a flashing kit that matches your covering. Rubble and old slate are removed through the house or by chute, and we protect the floors and stairs along the way.
Access to a terrace roof is often through the house or from the back, so we plan it first. Inside, the opening is lined and insulated, with a vapour control layer. We also advise whether planning or Building Regulations checks may apply before work starts. You will know before we start where the opening will go and how it will look from inside.