Fascias and soffits on Hanham's mixed housing
Older terraces and village houses in Hanham often still carry the original timber boards, flaking paint and all. On those homes we check what the existing soffit boards are made of before disturbing them, and plan the work around what we find. Some of these houses have eaves that were boxed in long ago, and it pays to go carefully and look before anything is pulled down.
The inter-war and post-war estates have long, plain eaves where fascias and gutters have usually been in place for decades. Sagging gutter runs and open joints along these roofs are a good sign the boards behind them have started to soften. Replacing the boards and gutters together on a long, plain eaves line gives a clean, even edge that runs the full length of the house.
Sloping streets mean the ground at the eaves is not always level, so scaffold has to be set carefully. Open edges towards the river see more driven rain, which is hard on the lowest board; that is one reason we look closely at rafter ends before covering them. It also keeps the job tidy for neighbours.
Fascia and soffit work available in Hanham
- Full fascia and soffit replacement. We remove the old boards and gutters, check the rafter ends and fit new UPVC fascia and soffit boards along the whole run.
- Bargeboards at gable ends. Bargeboards along the gable edge are replaced where timber has rotted, finishing the roof's side edge neatly against the tiles.
- Vented soffits. Vented soffit boards or vent strips let air move through the roof space, which helps stop damp and condensation building up in the loft.
- Gutter replacement alongside. New gutters and downpipes are fitted with the boards, so the fascia is not disturbed twice and the falls are set correctly.
- Capping over or replacing. Where the original boards are sound, capping can be an option; where they are rotten, we replace them rather than hide the problem.
- Repairs and partial replacement. A single failed length of board can be cut out and renewed, in white or a matching colour, without redoing the whole house.
How we fit fascias and soffits in Hanham
We begin with a survey from the ground and, where safe, from access equipment, noting the condition of the boards, the gutters and the rafter ends. Scaffold or a tower is arranged first, because working from a ladder alone is neither tidy nor safe. That also lets us check eaves details close up.
We explain whether capping or full replacement suits the property, and which finish you would like, white or a darker or wood-effect colour. The old boards come off, the timbers are checked, and the new UPVC goes on with the gutters refitted. Nothing is left half-finished, and the site is cleared as we go.