UPVC Roofline Work on Hillfields Houses
The inter-war and post-war semis of Hillfields usually have long, even eaves lines, and the original boards have often been painted again and again. Once the paint fails on the exposed side, the timber underneath absorbs water quickly. Rot that begins behind a peeling board can run along the eaves unnoticed, which is why a visual check from the ground is rarely enough.
Terraces are different. A short terrace has a continuous run of boards and gutters that may be shared in appearance if not in ownership, so a matching finish makes a visible difference. Gable-end bargeboards on semis take the wind coming up the hill. Matching the finish along a run makes a visible difference, and we help you pick between white and the darker or wood-effect options.
Attached garages carry their own fascia and gutter, often neglected, and a failed board there lets water into the wall below. We check what the older soffit boards are made of before disturbing them, and take the right precautions. Replacing it alongside the house roofline keeps the whole property looking consistent and stops water running behind the wall.
UPVC Fascia and Soffit Jobs We Do Here
- Full roofline replacement. Taking off all the old fascias, soffits and gutters and fitting new UPVC boards along every side of the house.
- Bargeboards on gables. Replacing worn timber bargeboards on semi gables with UPVC boards, finishing the roof edge cleanly against the wind.
- Vented soffit boards. Fitting vented soffits or vent strips so air moves through the roof space and condensation has a way out.
- Garage fascias and gutters. Renewing the boards and guttering on attached garages, which are often missed when the house itself is done.
- Gutter replacement alongside. Replacing gutters and downpipes at the same visit, since they have to come off the fascia in any case.
- Repairs and partial replacement. Replacing a short stretch of rotten board or a damaged corner when the rest of the roofline is still in good order.
How We Replace a Roofline in Hillfields
Access is arranged first, with scaffold or a proper working platform put up so boards and gutters can be removed and fitted safely. With the old boards off we examine the rafter ends and eaves, and tell you what we find. Nothing is hidden, and nothing is covered over without you knowing what was under it.
Then the new boards go on. White is the usual finish, with darker and wood-effect choices also on offer, and we help you pick what suits the house. Ventilation is fitted, gutters are put back level, and we clear up behind us. Anything we find behind the old boards is shown to you.