Fascias and soffits on Montpelier's terraces and villas
Terraced rows here often share a continuous run of eaves, and one failed gutter can wet the boards of several houses. When we replace boards on one property we look at how the line meets its neighbour, so the new work finishes cleanly instead of leaving an awkward step. That keeps the finished run looking deliberate.
Many of the houses are split into flats, so the eaves may belong to the whole building while the people living beneath them are separate. We explain what we find in terms that can be shared with the other owners, and keep the scope of work clear before anything is ordered. That makes decisions between owners much easier.
Height and steep streets make access the main practical issue. Fascia and soffit work almost always needs scaffold or a proper access tower, and we plan it with the pavement and the slope in mind. Colours run from white to darker greys and wood-effect finishes, which suit the colourful streets well. We bring samples or describe the options so the choice is easy.
Fascia and soffit work we do in Montpelier
- Full fascia and soffit replacement. Old boards removed along the whole eaves, rafter ends checked, and new UPVC fascias and soffits fitted in a continuous, neat line.
- Bargeboards at gable ends. Replacing weathered boards along the gable edge, where wind and rain hit hardest, with matching UPVC that finishes cleanly at the ridge.
- Vented soffits and vent strips. Fitting vented boards or discreet vent strips so air can move through the roof space and damp stays out of the timbers.
- Gutter replacement alongside. New gutters and downpipes fitted with the boards, so the joints that caused the rot are not simply put back on fresh timber.
- Capping over existing boards. Where the boards underneath are sound, new UPVC capping can be fitted over them as a tidy, less disruptive alternative to full removal.
- Repairs and partial replacement. Replacing only the rotten lengths of board and sections of soffit where the rest of the eaves is in good order.
How we approach eaves work in Montpelier
Before we touch an older house, we check what the existing soffit boards are made of, because some old materials need handling with care. That check is routine and we simply tell you what we find, then work in the way the result calls for. There is no fuss about it, and nothing is rushed.
Once the old boards and gutters are off, we look at the rafter ends and the eaves for damp or rot, repair what we find and then fit the new boards. We explain beforehand how the scaffold will sit on your street and how long it will be up.