Roof windows for Henbury's older and newer homes
The older stone houses and cottages around Henbury's village core often have deep lofts under steep roofs, and a roof window can bring daylight into a room with little else. Thick walls and awkward rafter spacing mean we measure and check on site. Those thick walls and uneven timbers are why we measure on site, not from plans, and why we always check rafter condition before cutting.
On the inter-war and post-war estates, semis and bungalows have loft spaces that suit conversion. Roof windows in those lofts are a neat alternative to a full dormer, though the rafters may need trimming and doubling up around the opening. Rafter spacing matters in those roofs too, as does the loft height beneath, so we check both before marking out the opening.
Roof coverings differ a lot between a cottage and a 1950s estate house, so the flashing kit has to be chosen for the covering in each case. We also deal with misting windows, where a failed sealed unit lets moisture build between panes. Matching the kit to the covering is what keeps the opening watertight in wind-driven rain, so we confirm it on the day.
Roof window jobs in Henbury
- New roof window in a loft. We open the roof, frame the opening with doubled rafters where needed and fit the window with the correct flashing kit for your covering.
- Replacement of old roof windows. Old units with failed seals or worn flashings are swapped for new ones, with the surround checked before the new window goes in.
- Loft conversion windows. In a loft conversion, windows are positioned for light and ventilation and finished with linings, insulation and vapour control.
- Bungalow and dormer windows. Bungalow roofs and dormer cheeks can take roof windows, subject to a structural check and suitable detailing of the covering.
- Leak diagnosis around windows. If a roof window drips, we check flashing, sealing, condensation and the covering around it before blaming the glass.
- Misted unit replacement. A window with moisture between the panes has a failed sealed unit, and we advise on replacing the glazing or the whole window.
How we install a roof window in Henbury
We begin by studying the roof covering and the rafters from the loft. The covering decides the flashing kit, and the rafters decide how the opening is framed. These checks are made on site, since older roofs rarely match any drawing. We then agree the position of each window and how it will look from outside.
With the window fitted, we line the opening, insulate around it and seal it against air and damp. Planning or Building Regulations checks may apply, and we advise before work starts so you are not caught out part-way through. Where an old window is being replaced, we also check the surrounding tiles and flashing before reusing anything.