Roof windows in Lawrence Weston lofts
The roofs here are concrete tiles on semis and short terraces, and each covering needs a flashing kit that suits its profile. We choose the kit for the tile, not the other way round, because a poorly matched flashing is where most roof window leaks begin. Getting that match right at the start is what keeps the window dry through many seasons of rain and wind.
Rafter spacing matters on these houses. To make an opening, rafters may need trimming and doubling up, and we check that on site before promising a size or position. In a modest post-war loft, sensible placement often decides how usable the space becomes. That is why a quick look in the loft always comes before any firm advice on size or position.
Wind from the Severn side puts pressure on anything set into the roof slope. Good sealing and secure fixing around the frame matter more on an exposed estate than on a sheltered street, and we take extra care with the top and side flashing. We therefore talk through how the window is fixed, not only how it looks once it is finished.
Roof window jobs in Lawrence Weston
- New roof window installation. Cutting a new opening in a concrete-tiled slope, trimming rafters as needed and fitting a window with a matching flashing kit.
- Replacing old roof windows. Taking out leaking or misted windows and fitting new ones with fresh flashings, rather than sealing over a tired frame.
- Loft conversion roof windows. Windows fitted to bring light and ventilation into loft rooms being created in semis and end-of-terrace houses.
- Lining, insulation and vapour control. Finishing the opening inside with insulation and vapour control so the window is warm and condensation is limited.
- Misted unit diagnosis. Checking whether a misting window has a failed sealed unit and whether just the glass needs replacing.
- Leak investigation around windows. Tracing leaks to flashing, sealing, condensation or the roof covering around the window, since the glass is rarely at fault.
How we install roof windows in Lawrence Weston
We look at the loft first, from inside. We check the rafters, headroom and where the window would sit, then look at the tiles outside. We explain what the opening will involve before any tile is lifted, including how the surrounding structure is supported. You can ask as many questions as you like at this stage, because it is much easier to alter a plan than a finished opening.
The window is matched to its flashing kit and fitted to the maker's guidance. We then line the opening, insulate and add vapour control. New openings and loft conversions may need planning or Building Regulations checks, and we advise before work starts. Once it is in, we check the seal and flashing from inside and out, and tidy the loft as we leave.