Verges on Redfield roofs
Redfield's rows of Victorian terraces mean only some houses have a verge at all, usually at the end of a row or around a side gable. Those edges have faced the weather for a very long time, and old mortar is often cracked, loose or missing in patches. That is why we treat a crumbling edge as a prompt to check the rest of the slope.
With small yards and tight passages, falling mortar has nowhere much to go. It lands on a bin area, a back gate or a neighbour's path, and loose pieces at height are better dealt with by a roofer than left to the next gust. It is a small fault with a messy habit of getting bigger.
A dry verge does not fix a roof that is failing elsewhere, so we look at the slope as well. Whether the units suit depends on the tile profile, which we check on site, and fixing follows the tile maker's guidance for that roof. We tell you plainly if the units will not suit your tiles.
Dry verge work we carry out in Redfield
- Dry verge on re-roofs. When a terrace roof is being recovered, dry verge units are fitted from the start so the gable edge is finished without wet mortar.
- Replacing failed verge mortar. Cracked and loose mortar is removed and mechanically fixed verge units go in, leaving a tight and tidy edge.
- Tile-end and cap pieces. End and cap pieces matched to the roof covering are fixed to close the edge neatly and keep weather out.
- Fixings to the tile maker's guidance. Units are installed with the fixings and spacing recommended for the specific tile on your roof.
- Wind-loosened verge repairs. Verges lifted or loosened in a gale are re-secured or replaced so the edge stops catching the weather.
- Profile compatibility checks. Before any work is agreed, we confirm on site that your tile profile will take dry verge units properly.
How we fit dry verges on Redfield roofs
We start with the edge and the roof around it, checking how far the mortar has failed and whether tiles beneath have shifted. We confirm whether the profile suits a dry verge and explain what we find, including when the units will not suit. We show you what we find from the ground or in photographs.
The work follows the tile maker's fixing guidance. Old bedding is removed, the tiles are checked, and units and end pieces are fixed mechanically. We plan access to the gable, which may mean a tower in a small yard, and leave paths and drives clear of debris. You get a clear explanation before the work starts.