Fascias and soffits on Bradley Stoke's gabled homes
Gables are a defining feature of the town's estates, so bargeboards matter as much here as eaves fascias. A bargeboard runs up the edge of the gable, and when it cracks or lifts at the joints, rain and birds find their way in. Both need proper fixing and neat joints at the corners.
The fascia carries the gutter, so a board that has pulled away from the rafter ends will let the gutter sag and overflow down the wall. We often see staining on brickwork below a sagging run, long before the board itself looks bad. Replacing the board and gutter together puts that right.
Porches and conservatories have their own small eaves runs. These are easy to overlook, but they should match the main house, so we usually price and plan the whole property together rather than leaving odd lengths of old board. It looks far better and avoids mismatched colours. That also means one neat colour all round.
Fascia and soffit work for Bradley Stoke homes
- Full fascia and soffit replacement. Removing old boards and gutters, checking the rafter ends, and fitting new fascias and soffits all round the house.
- Bargeboards on gables. Replacing worn gable-edge boards so the roof edge looks tidy and stays closed against weather and nesting birds.
- Vented soffits and vent strips. Fitting ventilated soffit boards or vent strips so the roof space can breathe and condensation does not build up.
- Gutter replacement alongside. Fitting new gutters and brackets at the same visit, since the old ones have to come off for the boards anyway.
- Capping over existing boards. Covering sound old boards with UPVC capping where the timber behind is solid and a full strip is not needed.
- Repairs and partial replacement. Swapping a damaged length or a single elevation where the rest of the boards are still in good order.
How we fit fascias and soffits in Bradley Stoke
We start by measuring up and checking what the existing boards are made of before disturbing them. Scaffold or tower access is set up so the work can be done safely, then old boards and gutters come off and we inspect the rafter ends. This avoids surprises once the old boards are off.
If any timber has rotted, we say so and deal with it before new boards go on. Then the fascias, soffits and bargeboards are fitted, vents added where needed, and gutters refitted or replaced. You choose white or a darker or wood-effect finish. Everything is explained before work begins.