Roof windows on Bradley Stoke's concrete-tiled roofs
The roofs in the town's estates are covered in concrete tiles, and a roof window needs a flashing kit matched to that covering. A kit made for slates or plain tiles will not seal properly against a profiled concrete tile. Getting the flashing wrong is a leading cause of leaks around a new window.
Gabled houses give a good loft shape, but the rafters are in the way. The structure around the opening may need trimming and doubling up, and we check this on site rather than assuming it will be straightforward. Cutting a rafter without proper support can weaken the roof, so we plan this before the first tile comes off.
If you already have an older roof window, a leak is often blamed on the glass when the real cause is the flashing, the seal or the tiles around the frame. A misting pane is different: that is a failed sealed unit and the glazing needs replacing. Telling the two apart saves you from replacing a window that was never the fault.
Roof window work in Bradley Stoke
- New roof window installation. Cutting in and fitting a new window with a correct flashing kit, lining and insulation around the opening.
- Replacing old roof windows. Swapping a tired or leaking window for a new unit and renewing the flashing to suit the tiles around it.
- Loft conversion windows. Fitting one or more roof lights as part of a loft room conversion so the new space gets light and air.
- Re-flashing and resealing. Fixing leaks at the edge of an existing window by renewing flashings and sealing rather than replacing the whole unit.
- Misted glazing replacement. Replacing a failed sealed unit where the glass has misted but the frame and surround are still sound.
- Lining and insulation reinstatement. Finishing the inside of the opening with lining, insulation and a vapour control layer so it stays dry.
How we plan a roof window in Bradley Stoke
We measure the slope, check the tile type and look at the rafters from the loft before suggesting a size and position. Whether the structure needs trimming and doubling up is checked on site, and we explain it before work starts. That keeps the plan realistic. We then agree the position with you.
A roof window installation may need planning or Building Regulations checks, and we advise before work starts. On the day we strip tiles around the opening, fit the frame and flashing, and finish the inside with lining and insulation. Once the window is in, we check the flashing and inside finish.