Fascias and soffits in Shirehampton's weather
Wind-driven rain gets behind gutters and into joints on exposed elevations, and the timber behind starts to rot where it stays wet. On Shirehampton's west-facing fronts and backs, we often find the boards worst affected, with the east side in better shape than the side taking the weather. We keep the work area tidy and protect paths, drives and gardens as we go.
Bargeboards at the gable ends take the full force of the wind. Where they have split or worked loose, rain reaches the roof edge and the wall below. On village-style terraces and semis, we check the bargeboards at the same time as the fascias, since both usually have the same age and the same problem.
Many houses here have had the same timber eaves since they were built. Before we disturb old soffit boards, we check what they are made of and handle them accordingly. Once they are off, we look at the rafter ends, deal with anything damp, and fit new boards with vents. If we find something unexpected, we stop and talk it through with you first.
Fascia and soffit jobs around Shirehampton
- Full fascia and soffit replacement. Taking off the old boards and gutters, inspecting the rafter ends, and fitting new UPVC fascias and soffits right around the house.
- Bargeboard replacement. Renewing gable-edge boards that wind and rain have split or loosened, and making the roof edge neat and weathertight.
- Vented soffits and vent strips. Building ventilation into the eaves so the roof space breathes and condensation does not build up on the timbers.
- Gutter replacement alongside. Fitting new gutters and downpipes while the boards are being changed, so the whole eaves line is dealt with once.
- Capping over sound boards. Covering fascias with UPVC where the timber behind is healthy, which saves stripping out boards that are still doing their job.
- Repairs and partial replacement. Replacing a rotten length by a downpipe or corner without redoing the whole elevation, where the rest is in fair order.
How we work on fascias and soffits in Shirehampton
We look at the boards from the ground, noting where paint is peeling, gutters sag or timber is soft. Scaffold or a tower is needed for safe access, and we arrange it first. We explain what we find and which elevations need doing, so you can see why a board has to go.
The old boards and gutters come off together, any damp rafter ends are dealt with, and the new UPVC goes on with ventilation built in. White is the usual choice, though darker and wood-effect finishes are available. On terraced streets, we keep access tidy and leave the gutters running clear.