Roof windows on Easton's terraced houses
On a narrow terrace, the roof slope is not wide, so the position of a window matters. We think about where it will sit relative to the party walls, the chimney breast and the rear lean-to below, and we look at the best way to light the room. A well-placed window avoids awkward flashing details later.
Cutting an opening usually means trimming a rafter and doubling up timbers around it, and Victorian roofs vary in how well they are built. We check the structure on site before saying what is possible. Slate and older tile coverings also need the right flashing kit. That checking is simple, and it avoids surprises once the roof is open.
If your terrace already has roof windows, they may be old, misting or leaking. A replacement into the same opening is often straightforward, but the lining and insulation around it deserve a look, because damp there is often the reason a window seems to be failing. Putting those right in the same visit is usually the neater route.
Roof window work in Easton
- New roof window installation. Cutting a new opening, framing it correctly and fitting a window with a flashing kit that suits your roof covering.
- Replacing old roof windows. Removing tired or leaking windows and fitting new ones into the same opening, with fresh flashing and sealing.
- Terrace loft conversions. Supplying and fitting roof windows for loft rooms in terraced houses so the space has daylight and ventilation.
- Lining and insulation. Finishing the inside of the opening with lining, insulation and vapour control so it is neat and free of condensation.
- Flashing and covering leaks. Finding leaks that come from the flashing, sealing or roof covering round a window, and putting those right.
- Misted glass replacement. Dealing with windows where the sealed unit has failed and moisture has built up between the panes.
How we fit roof windows on Easton streets
We start by looking at the roof covering and the loft below, which tells us the rafter spacing and where the window can go. We then pick a flashing kit that suits your tiles or slates, and tell you what trimming and framing the opening will need. We also agree the size and position with you.
On a tight terraced street, we plan how the window and materials reach the roof, and we protect the room below while the opening is cut. Some work may need planning or Building Regulations checks, and we advise before work starts. The inside is lined and left tidy.