Roof Windows for Henleaze Loft Conversions
Henleaze has many loft conversions on its Edwardian and inter-war semis, and a good number of bungalows and larger detached houses with room to convert. Roof windows suit all of them, adding headroom light without a full dormer. That gives a bright room, and it often costs less disruption than a full dormer.
Fitting one means opening the roof. Rafters may need trimming and doubling up around the opening, and that is checked on site before we cut. Tiles and slates around the window are lifted and relaid with the flashing set in properly. We take the same care at the junction with the lining inside the room.
Replacing an older window is a different job. Old units can mist where the sealed glass has failed, or leak at tired flashings, and a like-for-like swap on an existing opening is often straightforward once we see what is there. Either way, the flashing kit has to suit your tiles or slates.
Roof Window Work We Do Across Henleaze
- New roof window installation. Cutting in a window to a loft or bungalow roof, with rafters trimmed and doubled up where needed and the opening fully sealed.
- Replacing old roof windows. Taking out ageing or misted windows and fitting new ones to the same opening, with fresh flashing and sealing.
- Loft conversion windows. Fitting roof windows into converted lofts on semis and detached houses, with lining and insulation to suit the new room.
- Bungalow and dormer lofts. Adding light to bungalow roof spaces and dormer lofts, where the pitch and covering decide the flashing kit we use.
- Flashing kit and re-tiling. Fitting the flashing kit matched to your roof covering, and relaying tiles or slates neatly around the frame.
- Leak and condensation checks. Finding whether a window problem is the flashing, the sealing, condensation or the covering, before replacing anything.
How We Fit a Roof Window in Henleaze
Before any cutting we look at the loft from inside, the rafter layout and the roof covering outside. The window is matched to the right flashing kit, and we explain what structural work, if any, the opening needs. That way nothing is cut that should have been checked first. We note the rafter spacing too.
A new opening may need planning or Building Regulations checks — we advise before work starts. We then fit the window, flash it, line and insulate round it, and check the seals so the room stays dry. The room is left dry, tidy and ready to use. You will know what is happening each day.