Fascias and soffits on Barton Hill homes
Victorian terraces in Barton Hill often have plain eaves boards that have been painted again and again. When gutters leak or overflow, the water sits on the timber, and rot sets in at the joints before it shows on the surface. Over a long terrace run, the same joint failures repeat at each corner and drip point, which makes them easy to spot once you know where to look.
The later council-built houses have a different problem. Many were fitted with fascias and soffits of a standard type decades ago, and these have since warped, split or come loose, particularly at the corners and along long runs under shared eaves. Where eaves are shared or run close together, a loose board can catch the wind and let rain into the gap behind it.
Because the housing is of mixed age, we check what existing soffit boards are made of before disturbing them, and handle them accordingly. Back extensions and outbuildings have their own roof-edge boards, which we can include so the whole property matches. We also like to see how the extension edge connects to the main roof, because a mismatch there lets water in.
Fascia and soffit work in Barton Hill
- Full fascia and soffit replacement. Old boards and gutters come off, the eaves and rafter ends are checked, and new UPVC fascias and soffits are fitted all round the roof.
- Bargeboard replacement. Bargeboards on gable ends are replaced where timber has rotted or boards have worked loose, giving the roof edge a clean finish.
- Vented soffits. New soffits with ventilation, or vent strips in the board, let air move through the roof space and cut down on damp in the loft.
- Gutter replacement alongside. Failing gutters and downpipes are replaced while the access is in place, and refitted to the right fall so they stop soaking the boards.
- Extension and outbuilding edges. Flat-roofed extensions and outbuildings often have their own edge boards, which we replace along with the main house so everything is in step.
- Capping over or partial repairs. Sound boards may be capped over, and where only one stretch has failed we replace that length and match it neatly to what remains.
How we fit fascias and soffits in Barton Hill
Safe access comes first. We use scaffold or a proper working platform along the eaves, and in streets of terraces we plan where it goes so neighbours can still get in and out. We agree this with you before the work starts. Because Barton Hill streets are tight, the scaffold also has to be planned with parking and footpaths in mind.
Once the old boards are off, we check the rafter ends and eaves for rot and tell you what we see. Then new boards, vented soffits and gutters are fitted, in white, a darker colour or a wood-effect finish to suit the property. No new board goes up until we have seen what is behind the old one.